CuffPal

How to measure blood pressure at home

To measure blood pressure at home, rest quietly for 5 minutes, sit with your back supported and your arm at heart level, put a correctly sized upper-arm cuff on bare skin, and take two readings one minute apart. Do this at the same times each day and write every number down.

Reviewed against AHA guidance on

Why measure blood pressure at home?

Home blood pressure monitoring shows how your pressure behaves in daily life, not just in a doctor's office where nerves can push the number up. Many doctors ask for home readings to confirm a diagnosis or check that treatment is working. The steps below follow American Heart Association guidance. The whole routine takes about 10 minutes.

How to take blood pressure: step by step

  1. Prepare 30 minutes ahead. Do not smoke, drink caffeine or exercise for 30 minutes before measuring. Use the bathroom first, because a full bladder can raise your reading.
  2. Rest for 5 minutes. Sit quietly for 5 minutes. Do not talk, watch exciting TV or look at your phone.
  3. Choose the right cuff size. Measure around your bare upper arm. The cuff should cover about 80% of the arm and match the size range printed on it.
  4. Sit with your back supported. Sit in a chair with your back supported, feet flat on the floor and legs uncrossed.
  5. Rest your arm at heart level. Place your arm on a table or armrest so the middle of the cuff is level with your heart.
  6. Put the cuff on bare skin. Wrap the cuff on your bare upper arm, not over clothing, with the lower edge about an inch above the bend of the elbow.
  7. Start the reading and stay still. Press start. Keep still, breathe normally and do not talk until the monitor finishes.
  8. Take a second reading. Wait one minute and take a second reading on the same arm.
  9. Write down every reading. Record both numbers, the date, time and arm, in a paper log or an app. Do not throw out the higher reading.
  10. Repeat at the same times each day. Measure at the same times every day, such as morning before medicine and evening, as your doctor advises.

Which blood pressure cuff size do I need?

Blood pressure cuff size is the most common thing people get wrong. Use a tape measure around the middle of your bare upper arm. The cuff's bladder (the inflating part) should wrap about 80% of the way around your arm. Monitors usually come in standard, large and small sizes, with the arm range printed on the cuff. A cuff that is too small can give a falsely high reading; one that is too large can read a little low.

Correct position for a blood pressure reading

  • Back supported by the chair, not slumped or on a couch
  • Feet flat on the floor, legs uncrossed
  • Arm resting on a table, cuff at heart level
  • Cuff on bare skin; roll up a thin sleeve only if it does not squeeze your arm
  • No talking, no moving, no phone

How often and when should I measure?

The AHA suggests two readings one minute apart, in the morning before medicines and again in the evening, every day for the week before a doctor visit, or as your doctor advises. Use the same arm and the same conditions each time so readings can be compared.

Record every reading

Write down both numbers, the date, the time and anything unusual, like a poor night's sleep. A single number tells little; a pattern tells a lot. Use a printable blood pressure log or the CuffPal app, which stores the readings you enter from your own cuff and can share them with your doctor. Then see what the numbers mean in our blood pressure checker.

Choosing a validated upper-arm monitor

Choose an automatic, upper-arm monitor that has been clinically validated for accuracy. The US validated device listing at validatebp.org lets you search by brand and model. Bring your monitor to a doctor visit so staff can compare it with their own device.

Wrist vs arm monitors

Wrist monitors are small and easy to use, but they are more affected by arm and wrist position, so the AHA does not recommend them as a first choice. If you cannot use an upper-arm cuff, ask your doctor which type to use and how to position it.

Common mistakes that give wrong readings

  • Measuring right after coffee, a cigarette, exercise or a stressful moment
  • Skipping the 5 minutes of quiet rest
  • Using the wrong cuff size, or placing the cuff over clothing
  • Crossing your legs or leaving your back unsupported
  • Letting your arm hang or measuring above or below heart level
  • Talking or moving during the reading
  • Taking one reading only, or recording just the lowest one

What if my reading is very high?

If a reading is higher than 180 and/or 120, wait a minute and measure again. If it is still that high, contact your doctor right away. If you also have chest pain, shortness of breath, back pain, numbness, weakness, change in vision, difficulty speaking, call 911. Otherwise, bring your log to your next appointment. Read about systolic vs diastolic numbers to understand each part of the reading.

Frequently asked questions

What is the correct position for a blood pressure reading?

Sit in a chair with your back supported, feet flat on the floor, legs uncrossed, and your bare upper arm resting on a table so the cuff is level with your heart. Stay quiet and still for the whole reading.

What blood pressure cuff size do I need?

Measure the distance around your bare upper arm, midway between shoulder and elbow, and choose the cuff size whose printed range includes that number. The cuff should cover about 80% of your upper arm. A cuff that is too small can read falsely high.

How many readings should I take, and when?

The American Heart Association suggests taking two readings, one minute apart, in the morning and again in the evening, ideally every day for at least a week before a doctor visit. Record every reading.

Is a wrist or an upper-arm monitor better?

The AHA recommends an automatic, cuff-style, upper-arm monitor. Wrist monitors are more sensitive to arm and wrist position and are less reliable, though they may help if an upper arm is too large for any cuff. Ask your doctor.

Which arm should I use?

Use the same arm every time. At your first check, measure both arms; if they differ, your doctor may tell you to use the arm with the higher reading.

Can a phone app measure my blood pressure?

No. A phone cannot measure blood pressure accurately. You need a validated cuff monitor. Apps such as CuffPal only store the numbers you type in from your own cuff.

Sources

  1. American Heart Association — Understanding Blood Pressure Readings
  2. American Heart Association — Monitoring Your Blood Pressure at Home
  3. ValidateBP — US validated blood pressure device listing
  4. CDC — About High Blood Pressure
  5. NHLBI — High Blood Pressure
  6. MedlinePlus — High Blood Pressure
  7. Mayo Clinic — High blood pressure (hypertension)

Not medical advice. This page is general information based on American Heart Association guidance. It does not diagnose or treat any condition. Talk to your doctor about your own readings. If you have chest pain, shortness of breath or signs of a stroke, call 911. Read our medical disclaimer.